4 string 14.8V lithium battery protection board 16.8V overcharge short circuit over discharge protection board 20A current limit protection
Low power inverter, massager battery pack, LED light standby power supply, electronic products, solar street light battery pack, monitor backup power supply, and other products.
Note: 3A current discharge products above, the battery discharge rate to 3C or more.
Magnification calculation formula: 1C magnification of the battery, 2000 capacity is equal to 2AH * 1 = 2A upper limit current.
3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A upper working current.
For some of the poor basis of electronic customers to explain: Do not put a good battery and poor battery mixed with the use of 4 groups of battery capacity / resistance closer to the better! (2 good battery + 2 poor battery use effect = 4 poor battery use effect).
Material: metal
color:green
In the use of the battery will heat is the battery does not apply, this situation must not be long-term use, the battery will soon be damaged.
Note 1: strictly according to map wiring 0V (B -), 3.7V (B1), 7.4V (B2), 11.1V (B3), 14.8V (B +), do not deliberately short circuit!
Note 2: after the need to charge the first line, will have output.
Note 3: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please single DU full of batteries and then used in series. The The Discharge test, the voltage drop is fast that group of batteries is poor battery.
The lithium battery protection board properties:
Model: HX-4S-A20 overcharge voltage range: 4.25-4.35v +/- 0.05v
Size: 35 * 35 * 3.0mm Over discharge voltage range: 2.3-3.0v +/- 0.05v
Upper working current: 6-8A Operating temperature: -40 --- +50 Celsius
Upper limit instantaneous current: 20A Storage conditions: -40-- +80 Celsius
Quiescent current: less than 30uA Effective life: more than 50,000 hours
Internal resistance: less than 100mOhm Short circuit protection: can be protected, need to charge recovery
The protection board size and device description;
The protection board size is 35 * 35 * 3.0mm; components for the S-8254AA protection chip and AO4407 * 4
Package Contents: 1x battery protection board
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Гарантия возврата средств

Если посылка не пришла в указанный срок или ее качество не соответствует заявленному мы вернем вам полную стоимость товара. Для этого перейдите в заказ и нажмите кнопку «Открыть спор».

Круглосуточная техподдержка

Наши специалисты на связи 24 часа. Приветливые менеджеры ответят на все ваши вопросы, помогут открыть спор и разобраться с оплатой. Вкладка в профиле «Связаться с нами».

4 string 14.8V lithium battery protection board 16.8V overcharge short circuit over discharge protection board 20A current limit protection
4 string 14.8V lithium battery protection board 16.8V overcharge short circuit over discharge protection board 20A current limit protection
1 /2
2 /2
0.00
0 заказов
4 string 14.8V lithium battery protection board 16.8V overcharge short circuit over discharge protection board 20A current limit protection
Цвет: green
Количество: 1
Магазин
Skyfall
Отзывы
Отзывов пока нет
Оставляйте отзывы за баллы.
И помогайте нам давать полную и правдивую информацию о товарах.
Low power inverter, massager battery pack, LED light standby power supply, electronic products, solar street light battery pack, monitor backup power supply, and other products.
Note: 3A current discharge products above, the battery discharge rate to 3C or more.
Magnification calculation formula: 1C magnification of the battery, 2000 capacity is equal to 2AH * 1 = 2A upper limit current.
3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A upper working current.
For some of the poor basis of electronic customers to explain: Do not put a good battery and poor battery mixed with the use of 4 groups of battery capacity / resistance closer to the better! (2 good battery + 2 poor battery use effect = 4 poor battery use effect).
Material: metal
color:green
In the use of the battery will heat is the battery does not apply, this situation must not be long-term use, the battery will soon be damaged.
Note 1: strictly according to map wiring 0V (B -), 3.7V (B1), 7.4V (B2), 11.1V (B3), 14.8V (B +), do not deliberately short circuit!
Note 2: after the need to charge the first line, will have output.
Note 3: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please single DU full of batteries and then used in series. The The Discharge test, the voltage drop is fast that group of batteries is poor battery.
The lithium battery protection board properties:
Model: HX-4S-A20 overcharge voltage range: 4.25-4.35v +/- 0.05v
Size: 35 * 35 * 3.0mm Over discharge voltage range: 2.3-3.0v +/- 0.05v
Upper working current: 6-8A Operating temperature: -40 --- +50 Celsius
Upper limit instantaneous current: 20A Storage conditions: -40-- +80 Celsius
Quiescent current: less than 30uA Effective life: more than 50,000 hours
Internal resistance: less than 100mOhm Short circuit protection: can be protected, need to charge recovery
The protection board size and device description;
The protection board size is 35 * 35 * 3.0mm; components for the S-8254AA protection chip and AO4407 * 4
Package Contents: 1x battery protection board
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
0 заказов

4 string 14.8V lithium battery protection board 16.8V overcharge short circuit over discharge protection board 20A current limit protection

156 ₽

Цвет: green

Доставка

Бесплатно, 10 - 36 дней (~31 октября - 26 ноября)
Количество
Бесплатная доставка

Мы всегда на стороне покупателя, вы можете вернуть товар или деньги в случаях:

1. Не соответствует описанию
2. Ненадлежащего качества
3. Не приехал

Похожие товары
3 Channel Optocoupler Isolation Module AC 220V Isolated Board Testing Module No PCB Holder AC Detection Module
515 ₽
Заказов: 2
Universal Smart Clips For Car Battery Short Circuit Antiback Constant Regulator Protections Clamp for Auto Booster Battery
387 ₽
Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
776 ₽
4 string 14.8V lithium battery protection board 16.8V overcharge short circuit over discharge protection board 20A current limit protection
150 ₽
LM317 AC/DC -DC Adjustable Voltage Regulator Step-down Power Supply Module Board
286 ₽
Universal Smart Clips For Car Battery Short Circuit Antiback Constant Regulator Protections Clamp for Auto Booster Battery
318 ₽
3 Channel Optocoupler Isolation Module AC 220V Isolated Board Testing Module No PCB Holder AC Detection Module
515 ₽
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
741 ₽
Заказов: 1
Universal Smart Clips For Car Battery Short Circuit Antiback Constant Regulator Protections Clamp for Auto Booster Battery
410 ₽
3D Printer Heat Bed Power Module General Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module - 4 Pack
960 ₽
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
508 ₽
Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
771 ₽
4 string 14.8V lithium battery protection board 16.8V overcharge short circuit over discharge protection board 20A current limit protection
149 ₽
4 string 14.8V lithium battery protection board 16.8V overcharge short circuit over discharge protection board 20A current limit protection
149 ₽
LM317 AC/DC -DC Adjustable Voltage Regulator Step-down Power Supply Module Board
274 ₽
DC-DC automatic buck-boost module 2.5V-15V to 3.3V 5V fixed output Small-sized power module
82 ₽
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
508 ₽
3D Printer Heat Bed Power Module General Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module - 4 Pack
1017 ₽
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
730 ₽
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
734 ₽
156 ₽
Корзина:
0 товаров на сумму
Оформить заказ