Дешевые товары
Настоящие отзывы
Гарантия возврата денег
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
2 Set Heated Bed Mosfet Module for 3D printer(can work on Anet A8).
Helpful for thermal bed to solve the problem of overload current and current load, it can well protect the connectors on the controller board before burning.
With the heat sink power module to your controller board, it can increase the maximum current up to 25A.
Under the condition of normal cooling, it works stably under I (Max) = 25A, the current must NOT exceed 25A during the working process.
It can be used in both Chitu motherboards and other open 3D printer motherboards.
If you intend to use heated bed for your 3D printer with a 12V power supply, then this module is recommended, else it may cause excessive current during the times, it can well protect the connectors on the controller board from burning.
If you need anything bigger or equal to 15A, this module is a must part!
For example, if the total power consumption is 240W and you have 12V power supply, then it means at least 20A is needed (20 x 12 = 240W).
As ChiTu controller board is only capable of 15A, this setting won't work. So you need this extra power module to make it work!
Color: Black
Max Current: 25A (Enhance heat dissipation)
Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22 inch
Mounting holes: 3.2mm diameter, for M3 screws
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).
Material: metal + plastic
Package Included:
2 Sets x Heated Bed Mosfet
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Гарантия возврата средств

Если посылка не пришла в указанный срок или ее качество не соответствует заявленному мы вернем вам полную стоимость товара. Для этого перейдите в заказ и нажмите кнопку «Открыть спор».

Круглосуточная техподдержка

Наши специалисты на связи 24 часа. Приветливые менеджеры ответят на все ваши вопросы, помогут открыть спор и разобраться с оплатой. Вкладка в профиле «Связаться с нами».

2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
1 /7
2 /7
3 /7
4 /7
5 /7
6 /7
7 /7
0.00
0 заказов
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
Цвет: black
Количество: 1
Магазин
Ino
Отзывы
Отзывов пока нет
Оставляйте отзывы за баллы.
И помогайте нам давать полную и правдивую информацию о товарах.
2 Set Heated Bed Mosfet Module for 3D printer(can work on Anet A8).
Helpful for thermal bed to solve the problem of overload current and current load, it can well protect the connectors on the controller board before burning.
With the heat sink power module to your controller board, it can increase the maximum current up to 25A.
Under the condition of normal cooling, it works stably under I (Max) = 25A, the current must NOT exceed 25A during the working process.
It can be used in both Chitu motherboards and other open 3D printer motherboards.
If you intend to use heated bed for your 3D printer with a 12V power supply, then this module is recommended, else it may cause excessive current during the times, it can well protect the connectors on the controller board from burning.
If you need anything bigger or equal to 15A, this module is a must part!
For example, if the total power consumption is 240W and you have 12V power supply, then it means at least 20A is needed (20 x 12 = 240W).
As ChiTu controller board is only capable of 15A, this setting won't work. So you need this extra power module to make it work!
Color: Black
Max Current: 25A (Enhance heat dissipation)
Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22 inch
Mounting holes: 3.2mm diameter, for M3 screws
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).
Material: metal + plastic
Package Included:
2 Sets x Heated Bed Mosfet
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
0 заказов

2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer

732 ₽

Цвет: black

Доставка

Бесплатно, 5 - 20 дней (~13 - 28 декабря)
Количество
Ino
Бесплатная доставка

Мы всегда на стороне покупателя, вы можете вернуть товар или деньги в случаях:

1. Не соответствует описанию
2. Ненадлежащего качества
3. Не приехал

Похожие товары
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
738 ₽
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
508 ₽
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
508 ₽
3D Printer Heat Bed Power Module General Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module - 4 Pack
957 ₽
2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer
727 ₽
3D Printer Heat Bed Power Module General Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module - 4 Pack
997 ₽
Fortuna 3D Printer Heat Bed Power Module General Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module - 4 Pack
957 ₽
DC-DC automatic buck-boost module 2.5V-15V to 3.3V 5V fixed output Small-sized power module
84 ₽
DC-DC automatic buck-boost module 2.5V-15V to 3.3V 5V fixed output Small-sized power module
81 ₽
3 Channel Optocoupler Isolation Module AC 220V Isolated Board Testing Module No PCB Holder AC Detection Module
524 ₽
3 Channel Optocoupler Isolation Module AC 220V Isolated Board Testing Module No PCB Holder AC Detection Module
524 ₽
DC Motor Speed Control Driver Board 3V-35V 5A PWM Controller Stepless DC 3V 6V 12V 24V 35V Variable Voltage Regulator Dimmer Governor Switching Build with LED Indicator and Switch Function
108 ₽
DC Motor Speed Control Driver Board 3V-35V 5A PWM Controller Stepless DC 3V 6V 12V 24V 35V Variable Voltage Regulator Dimmer Governor Switching Build with LED Indicator and Switch Function
118 ₽
DC Motor Speed Control Driver Board 3V-35V 5A PWM Controller Stepless DC 3V 6V 12V 24V 35V Variable Voltage Regulator Dimmer Governor Switching Build with LED Indicator and Switch Function
118 ₽
DC Motor Speed Control Driver Board 3V-35V 5A PWM Controller Stepless DC 3V 6V 12V 24V 35V Variable Voltage Regulator Dimmer Governor Switching Build with LED Indicator and Switch Function
123 ₽
DC Motor Speed Control Driver Board 3V-35V 5A PWM Controller Stepless DC 3V 6V 12V 24V 35V Variable Voltage Regulator Dimmer Governor Switching Build with LED Indicator and Switch Function
123 ₽
DC Motor Speed Control Driver Board 3V-35V 5A PWM Controller Stepless DC 3V 6V 12V 24V 35V Variable Voltage Regulator Dimmer Governor Switching Build with LED Indicator and Switch Function
108 ₽
DC Motor Speed Control Driver Board 3V-35V 5A PWM Controller Stepless DC 3V 6V 12V 24V 35V Variable Voltage Regulator Dimmer Governor Switching Build with LED Indicator and Switch Function
123 ₽
High power MOS tube, field effect tube, trigger switch, drive board, PWM regulator, electronic switch, control board module
71 ₽
1 pcs blue metal power supply module 2.8V ~ 5.5V input positive and negative 12V output 5V to 12V DC DC conversion module size 2.4*1.25*0.4cm
81 ₽
732 ₽
Корзина:
0 товаров на сумму
Оформить заказ